Why You Need a Professional to Perform Landscape Lighting Repair

If you constantly have to pay for landscape lighting repair, it may be time to consider updating your fixture design or engineering. A professional can help you select better-quality fixtures less likely to break due to poor design and materials.

Landscape Lighting

Landscape lighting is a great way to accentuate your gardens, garden walls, and privacy fences. However, it can be frustrating when your lights keep breaking! Click Here to learn more.

If you have a lighting system that isn’t working it may be because of one or more problems with the fixtures. These include problems with the wiring, connections or moisture. It could also be that the lights are being obscured by dirt. If you are able to see the fixture, you can check for a blown bulb and replace it. You can also check the circuit breaker to make sure it hasn’t tripped. You can also try realigning the light and adjusting its spacing.

Fixtures in landscape lighting systems have to endure a lot of weather conditions. Heavy rain showers, extreme heat and temperature changes can cause the fixture to lose its seal or develop corrosion. The resulting leaks can be a problem for your home and can even affect the surrounding plants.

The transformer is the power center of a landscape lighting system. It provides a safe voltage to all the light fixtures, but if the connections become loose, the lights will stop working. Electricity jumps between loose connections and generates excess heat, which can melt wires and create fire hazards. This is why all wire connections should be physically tested as part of routine maintenance for a landscape lighting system.

Another common problem with landscape lighting fixtures is leaking water. When multiple fixtures in a system start experiencing this issue, it’s likely that the components used in the installation were low quality and can’t handle the outdoor environment. For example, composite fixtures don’t do well with water and are prone to leaks.

Often times, the culprit is simply a corroded wire nut or pierce connector. If these are in use, it’s worth considering replacing them with watertight, heat-shrink connectors that will hold up to the outdoors and won’t corrode.

Landscape lighting is an investment that can add beauty to a home and increase its value. When you maintain it correctly, it will serve its purpose for years to come. However, if you neglect it, it will require expensive repairs and replacements. Fortunately, proper landscape lighting repair and regular maintenance can prevent most issues before they occur.


As you can imagine, your landscape lighting system has a lot of wires running through it. These wires connect the transformer to each fixture and supply the safe voltage to each light. These connections can be damaged by moisture or even just ageing. When this happens, the lights will not function and they may even cause a short circuit. This is very dangerous. A short circuit is when electricity jumps between two wires and can generate enough heat to melt the connections or even start a fire.

If you see a spark or smell smoke, turn off the power to your landscape lighting and contact a professional. They’ll be able to determine the cause of your problem and make any necessary repairs safely and effectively.

It’s important to inspect your lights on a regular basis to ensure they’re functioning properly. You can check for things like broken lenses, dented metal or corrosion on the fixtures themselves. It’s also worth examining the connections between each fixture and the transformer to make sure they’re tight.

One of the most common problems that can occur is when the bulbs in your landscape lighting go bad. LED lamps usually last a long time but, as with any light, they will eventually burn out and need to be replaced. Regularly changing the bulbs in your landscape lighting will help to preserve their lifespan and prevent them from burning out prematurely.

A well-lit exterior is an effective deterrent against crime and helps you to feel safer in your home. It’s important to inspect your landscape lighting regularly and address any issues as they arise in order to get the most from your investment. With proper care and maintenance, your landscape lighting can continue to enhance the beauty of your home for years to come.


A landscape lighting system adds a lot of visual value to your home. But the fixtures may need repair or replacement to function correctly. The lights may stop working due to a broken socket or wire, or they might not turn on at all. Sometimes the light is not operating because it’s not receiving enough voltage.

The first step in repairing landscape lighting is to check that the bulbs are properly inserted. If the light is not receiving power, it can be a simple fix: Remove the bulb, use an emery board to remove any corrosion on the contact points of the fixture and its wires, spray with automotive ignition cleaner, and then reinstall the bulb.

If the light is not turning on, there is a problem with the wiring or circuit. This could be caused by a loose or bad connections, corroded or dirty wiring, or the total wattage of all of the lights being over the transformer’s capacity. It is important to use a digital voltage meter to test each fixture. If the volts are off, then it will be necessary to do some more work on the system.

Corroded sockets are another common cause of landscape lighting problems. This is usually a result of moisture in the fixture, which can cause rust and corrosion on the contacts. It is important to clean the contacts of the fixture and its wires often to prevent corrosion.

Overgrown plants and trees can also affect the performance of your landscape lighting system. They can block the fixture from receiving sufficient sunlight, and they can create a safety hazard for anyone walking through your yard at night. It is important to trim and prune overgrown vegetation regularly to keep your landscape lighting system looking great.

If you’re noticing that your low voltage landscape lighting is breaking down frequently, it might be time to consider replacing the system altogether. Lighting technology has come a long way in recent years, and the fixtures and bulbs from 15 years ago just don’t compare to what is available today. If you’re tired of wasting your time with repairs, you might find it easier to install a new system that will last much longer and give you more functionality.


Landscape lighting is a great way to add beauty and functionality to your home’s exterior. It can make your home safer by providing an extra light for people walking around the property and it can deter criminal activity by making your house more visible. However, like other electrical equipment, it’s important to keep your outdoor lighting system in working order. If it becomes damaged, you’ll want to contact a professional who is experienced in Landscape Lighting Repair.

A common problem that can occur with landscape lighting is a faulty timer. The timer, which is located inside of your transformer, allows you to control when the lights come on & off. Most people have a manual timer that requires you to turn a knob to set the time of day that they will come on or go off. Manual timers also do not adjust for daylight savings or the changing of the seasons. If you find yourself having to reset your timer frequently, it may be time to replace it with a more efficient model.

The easiest way to check if your outdoor lighting timer is working properly is by opening up your transformer and looking inside. There should be a timer that looks like the picture above that is plugged in to the transformer cord. The timer will either have green and red pins that you can pull out or push in to change the time when your lighting will start & stop.

You can also find out if your timer is not working properly by checking to see if the lighting is on at the wrong times of day. If the lighting is not coming on when it should be or turning off too early, you can easily fix this by following the directions for your specific system.

Debra Flynn